My pencil pouch is a bit "worse for wear" so I decided to make a new one!
This design requires 80 - 1 1/2" squares so I thought it would be a good time to raid my scrap bin for some patchwork squares.
I am calling this pouch the "Baby Patchwork Zipper Pouch" because the 1" finished squares are as tiny & as cute as a baby : )
Materials
| 80– 1 1/2” squares assorted print fabric | 1" x 1 1/2" print fabric for zipper end | |
| 1/4 yard Print fabric for the lining | Matching thread | |
| 1/4 yard muslin or solid cotton backing | Pins | |
| 1/4 yard batting | 9” coil zipper | |
| Zipper Foot | Marking Pen, pencil, or Hera Marker (for quilt marking) | |
Cut
| ||
2 - pieces of Batting 6” x 9”
|
1" x 1 1/2" print fabric for zipper end
| |
2 pieces of muslin or other cotton (it will be hidden)
6” x 9”
|
2 rectangles lining 5 1/2” x 8 1/2"
| |
80 – 1 1/2” squares assorted print fabric
|
Zipper Pull (optional) I found the cute flower pull at SunnyDayFabric.com
| |
Notes:
~All seam allowances are 1/4" unless otherwise noted
Finished Size:
4" tall x 8" wide
Stitch each row together.
Press the seams in opposite directions.
Press seams open.
Repeat for the other side side of the pouch.
3) Make a quilt sandwich:
Place the backing fabric wrong side up. Place the batting square on top.
Place the top panel right side up at the very top.
Baste all layers together.
4) Quilt diagonal lines on the patchwork panel:
The outside quilting lines should start 1/4” in from the edge.
Mark the stitching lines with a hera marker or removable pen or pencil.
Trim the panel to 5 1/2” x 8 1/2”.
Repeat for the other side.
5) Shorten the zipper to 7 1/2" measuring from the top of the zipper head to
the bottom of the zipper.
6) Fold under the 1" side of the zipper tab 1/4" to the wrong side. Press.
Press in half wrong sides together.
Pin in Place.
Stitch the folded edge with an edge stitch.
8) Fold back the zipper tape on the top edge of the zipper to the wrong side.
Glue baste or machine baste in place.
Glue baste or machine baste in place.
9) Place the zipper to the pouch right sides together with the top edges of the pouch
and zipper tape matching.
and zipper tape matching.
Center the zipper on the pouch panel. Stitch the top edge with
a 1/4" seam allowance back tacking at ends.
a 1/4" seam allowance back tacking at ends.
10) Place the lining right sides with the pouch panel matching the top raw edge.
Pin in place.
The zipper will be sandwiched in between the pouch and lining panels.
Stitch the top edge with a 1/4" stitch back tacking at ends.
11) Press the pouch and lining panels away from the zipper. Press.
Top stitch 1/8" away for the seam line starting and stopping your stitching 3/8"
from the raw edge.
from the raw edge.
~Repeat for the other side~
12) Separate the lining pieces from the pouch pieces.
Place the pouch pieces right sides together, matching seams and raw edges.
Pin in place.
Place the lining pieces right sides together, matching seams and raw edges.
Pin in place.
The zipper teeth should face towards the lining.
Make sure the zipper is open.
Sew around the perimeter leaving a 4" opening on the bottom lining side.
13) Box the corners:
Place the bottom and side seams right sides together at the bottom corner
with seams pressed open.
Mark 1" up from the bottom corner. Stitch on the marked line back tacking at ends.
Trim the seam 1/4" beyond the stitching. Repeat for the other bottom corner.
Repeat for the lining.
14) Turn right side out and press.
Machine stitch or hand stitch the opening in the lining closed.
Congrats! You have made a "Baby patchwork zipper pouch"
Happy Sewing.
xo
Charise
Love the zipper pull! Where did you get it?
ReplyDeleteThank you for the pattern! This pouch is adorable!!
ReplyDelete